optoway trsl-9115g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 1 trsl-9115g / TRSL-9115AG 3.3v / 1310 nm / 2.5 gbps rohs compliant sff lc single-mode transceiver ********************************************************************************************************************************************************************* features l duplex lc single mode transceiver l sonet oc-48 ir-1 / sdh stm-16 (s-16.1) compliant l fiber channel 2x/1x sm-lc-l fc-pi compliant l ieee 802.3z gigabit ethernet compliant l small form factor, rj-45 size, 2x5 pin package l 1310 nm dfb ld transmitter l 13 db link budget at least l ac/ac coupled signal input / output l lvttl transmitter disable input l lvttl signal detection output l single +3.3 v power supply l rohs compliant l 0 to 70 o c operating: trsl-9115g l -20 to 85 o c operating: TRSL-9115AG l wave solderable and aqueous washable l class 1 laser international safety standard iec-60825 compliant applications l atm switches and routers l sonet / sdh switch infrastructure l xdsl applications l metro edge switching description the trsl-9115g series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as sonet oc-48 ir-1 / sdh stm-16 (s-16.1), gigabit ethernet and 1x/2x fiber channel. this module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. the transmitter section uses a multiple quantum well 1310 nm dfb laser and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. a pecl logic interface simplifies interface to external circuitry. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (mb/s) sonet /sdh distance (km) wavelength (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) rohs compliant trsl-9115g 2488 ir-1/s-16.1 15 1310 dfb 2x5 lc 0 to 70 0 to -5 -18 yes TRSL-9115AG 2488 ir-1/s-16.1 15 1310 dfb 2x5 lc -20 to 85 0 to -5 -18 yes absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating temperature topr 0 -20 70 85 o c trsl-9115g TRSL-9115AG soldering temperature --- 260 o c 10 seconds on leads only power supply voltage vcc 0 4.5 v input voltage --- gnd vcc v output current iout 0 30 ma recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating temperature topr 0 -20 70 85 o c / trsl-9115g o c / TRSL-9115AG data rate 622 2488 2700 mb/s
optoway trsl-9115g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v1.0 2 transmitter specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -5 --- 0 dbm 1 output center wavelength l 1270 1310 1360 nm output spectrum width dl --- --- 1 nm -20 db width side mode suppression ratio smsr 30 db extinction ratio e r 8.2 --- --- db output eye compliant with bellcore gr-253-core and itu recommendation g.957 optical rise time t r 150 ps 20% to 80% values optical fall time t f 150 ps 20% to 80% values relative intensity noise rin -120 db/hz electrical power supply current icc 180 ma 2 data input current C low i il -350 m a data input current C high i ih 350 m a differential input voltage v ih - v il 300 mv data input voltage C low v il - v cc -2.0 -1.58 v 3 data input voltage -- high v ih - v cc -1.1 -0.74 v 3 disable input voltage -- low v tdis,l 0 0.5 v tx output enabled disable input voltage -- high v tdis,h vcc C 1.3 vcc v tx ouput disabled shut off time for txdis t dis 1 ms notes: 1. output power is power coupled into a 9/125 m m single mode fiber. 2. maximum current is specified at vcc = maximum @ maximum temperature. 3. these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs. receiver specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical sensitivity --- --- --- -18 dbm 1 maximum input power pin 0 --- dbm signal detect -- asserted pa --- --- -18 dbm transition: low to high signal detect -- deasserted pd -35 --- --- dbm transition: high to low signal detect -- hysteresis 1.0 --- db wavelength of operation 1100 --- 1600 nm electrical power supply current icc 100 ma 2 data output voltage C low v ol - v cc -2.0 -1.58 v 3 data output voltage C high v oh - v cc -1.1 -0.74 v 3 signal detect output voltage -- low v sdl 0.8 v signal detect output voltage -- high v sdh 2.0 v notes: 1. minimum sensitivity and saturation levels at ber=1e-10 for a 2 23 -1 prbs. 2. the current excludes the output load current. 3. these outputs are compatible with 10k, 10kh and 100k ecl and pecl outputs.
optoway trsl-9115g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v1.0 3 connection diagram pin symbol notes 1 v ee r directly connect this pin to the receiver ground plane 2 v cc r +3.3v dc power for the receiver section 3 sd active high on this indicates a received optical signal. 4 rd - receiver dataout bar. see recommended circuit schematic 5 rd+ receiver dataout. see recommended circuit schematic 6 v cc t +3.3v dc power for the transmitter section 7 v ee t directly connect this plan to the transmitter ground plane 8 tdis transmitter disable. connect this pin to +3.3v ttl logic 1 to disable module to enable module connect to ttl logic low 0 9 td+ transmitter data in. see recommended circuit schematic 10 td- transmitter data in bar. see recommended circuit schematic ms ms mounting studs. connect to chassis ground recommended circuit schematic v e e r 1 v c c r 2 s d 3 r d - 4 r d + 5 v c c t 6 v e e t 7 t d i s 8 t d + 9 t d - 1 0 txdis(lvttl) z=5or z=50r 1uh 10uf 10nf 10uf 10nf vcc3.3v 1uh 10uf 10nf z=5or z=50r phy device td- td+ rd+ rd- sd 100r vcc3.3v lvpecl vcc3.3v lvpecl to lvttl stage note: 1. tx input is terminated inside the module. 2. veer and veet are not internally connected to each other. 3. 50 line pattern and component placements on td+/td- and rd+/rd- lines shall be symmetrical for better impedance matching.
optoway trsl-9115g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v1.0 4 package diagram units in mm 1) standard case trsl-9115g / TRSL-9115AG 2) extended case trsl-9115eg / trsl-9115aeg note: specifications subject to change without notice.
|
